☆  Pulse Oximeters
☆  Infant Incubator
☆  Infant Radiant Warmer
☆  Transcutaneous Jaundice Detector
☆  SPO2 Sensors
☆  Ophthalmology Ultrasound
☆  Digital Thermometer
☆  Blood Pressure Meter
☆  Blood Glucose Meter
☆  Patient Monitor
☆  ETCO2 Module
☆  NIBP Module
☆  ECG Cables
☆  Temperatures sensors
☆  Infusion/Syringe Pumps
☆  Ophthalmic Equipments
☆  Nebulizer
☆  Module Accessories
☆  Defibrillator
☆  SPO2 module
☆  Video Laryngoscope
  Products Show  

B100 NIBP Module

B100 NIBP Module

Function:

1. Numerical calculation: calculate systolic blood pressure, mean pressure, diastolic blood pressure, and pulse rate.

2. Automatic measurement mode: 1, 2, 3, 4, 5, 10, 15, 30, 60, 90 minutes.

3. Manual measurement mode: the user needed to manually start a measurement.

4. Calibration mode: the value of continuity in the provision of cuff pressure

5. Measurement unit: mmHg

6. Serial Communication: RS232 port, TTL-level, 4800 baud rate

7. Self checking: self-checking function available after reset

 

 

Characteristics:

Ø         Small in size, simple, excellent reliability and ease of installation clinical monitoring of the accuracy; Excellent reliability and accuracy of clinical monitoring

Ø         The latest digital signal processing technology to achieve anti-noise and software algorithms anti-interference by moving arm;

Ø         Capable of accomplishing all NIBP measurement items;

Ø         Comply with CE safety design;

Ø         Comply with all NIBP standard of ANSI/AAMI;

Ø         Applies to adults, children and Newborn;

Ø         5V/12V single powersupply to avoid interference with the digital circuit by the pump

Ø         Fully compatible with the protocol of CAS Non-invasive blood pressure module (NIBP)

 

Specifications:

Measuring range

Adult:
30 to 255 mmHg systolic blood pressure
An average of 20 to 235 mmHg pressure
15 to 220 mmHg diastolic blood pressure
Pulse rate of 30 to 240 times / min

 Newborn:
30 to 135 mmHg systolic blood pressure
An average of 20 to 125 mmHg pressure
15 to 110 mmHg diastolic blood pressure
Pulse Rate of 40 to 240 times / min

 Measurement time

Adults: up to more than 120 seconds;
Newborn: up to more than 90 seconds;

Restriction on software over-voltage

Adult:  Less than 290mmHg;
Newborns: no more than 145mmHg;

Protection on hardware over-voltage

Adult: 300 ±10 mmHg;
Newborn: 150 ±4 mmHg;

Measuring principle

Oscillometry

Deflation approach

ladder Deflated

The initial inflation pressure value

Adult: 150 mmHg;
Newborn: 70 mmHg;

Sensor zero reset

Prior to each measurement

Resolution

1 mmHg

Measurement accuracy

Maximum average deviation: no more than ± 5 mmHg;
maximum standard deviation: less than 8 mmHg;

Pressure accuracy instructions

± 3 mmHg

Leakage

less than 6 mmHg Per minute;

Electrical performance

Voltage: 12 VDC (adapt to the corresponding valve), 5 VDC
Quiescent current: 80 mA
Measurement current: 200 mA
inflated current: 600mA

Environment

Operating Temperature: 0 to 55 Celsius degrees
Storage Temperature: -20 to 65 Celsius degrees 
Humidity Range: 0 to 95%, non-condenser
Operation Altitude: -500 m to 4600 meters
Life Span: can operate 100,000 blood pressure measurements

Size

12.6 cm x 6.8 cm x 2.8 cm

Weight:

180 g